More info:


OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas - the perfect companion for our SXT, or for any other 802.11 standard device.

Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 400mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.

LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal - or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive. The OmniTIK runs RouterOS with all it’s features

Box contains: OmniTik U-5HnD, mounting loops, PoE injector, power adapter

Product specifications

Product code OMN5HnD
CPU speed 400MHz
Current Monitor No
Antenna gain 7.5dBi
TX power 26dBm
Architecture MIPS-BE
LAN ports 5
Gigabit No
MiniPCI 0
Integrated Wireless Yes
Wireless standards 802.11a/n
Memory Cards No
Power Jack No
802.3af support No
PoE 8-30V
Voltage Monitor No
CPU temperature monitor No
Dimensions 368x125x55mm
Operating System RouterOS v5 and above
Temperature range -30 .. +70C
RouterOS License Level4

Ethernet throughput

RB OmniTIK U-5HnD @400MHz (5 port test) 64 byte frames 512 byte frames 1518 byte frames
IP Firewall Conntrack Mode Mbps Fps Mbps Fps Mbps Fps
off off Bridging 47.1 92000 358.4 87500 452.97 37300
on off Routing 37.68 73600 294.91 72000 452.97 37300
on off Bridging 35.48 69300 230.2 56200 446.9 36800
on on Routing 28.42 55500 222.41 54300 445.68 36700
on on Bridging 18.94 37000 149.5 36500 425.04 35000
  1. All throughput tests done with Xena Networks specialized test system and RouterOS v5, according RFC2544, with Ethernet frame sizes 64, 512, 1518 bytes.
    Each board is tested with specified number of Ethernet interfaces, to ensure optimal load on hardware.
  2. Values in Italics indicate that the maximum possible throughput was reached, limited only by ethernet ports themselves.